Draw My Tiny Home Plans
Please don't permit the logo (er, um, header image, I mean) for Tiny r(E)volution fool you. I know very petty about blueprints. In fact, before we started this adventure I knew next to nothing even though I worked for a blueprint and big format copy shop for well-nigh 2 years. But as I accept learned I have gotten to understand that there are basically two means to make your ain blueprints.
- Using home design software (or spider web based apps like Google Sketchup).
- Drawing them by hand.
What I have really institute is that it is much easier to describe blueprints past hand on either a sheet of graph paper or even a piece of posterboard rather than to take the time to learn blueprint software in guild to completely generate the cross sections, framing, electrical piece of work, and other details required to have your edifice plans approved; if necessary, of course. What I have also plant is that many of the Gratuitous and inexpensive programs simply do not generate enough item for full structure illustrations. They are more generic and focus on changing wall colors and adding a 2-seat sofa rather than a three-seat.
When I first thought of designing my own blueprint and then drawing it I was plagued past cold sweats and thoughts of CAD and other expensive, and difficult tools. But with a resource like Sketchup or fifty-fifty your own manus cartoon, you tin can easily move walls, add built-ins, requite stairs in identify of ladders, etc. Consider it drag and drib for the pattern challenged. Only whether you are using home pattern software or drawing your blueprints by paw, the get-go drawings to start with are your floor plans.
Basic Blueprint Tools
When drawing your blueprint by hand you lot need very footling. However, the following tools are nigh handy and I institute myself using them repeatedly.
- T-square
- Adaptable triangle
- Lead pencil (old-fashioned or mechanical although mechanical is easier to go along sharp)
- Fine tip sharpies
- Gum eraser
- Compass
- Straight border or ruler
- Big flat working surface (table)
- White poster board every bit a base of operations for your working surface
Cartoon to Calibration
I am no mathematician. I know that i+ane=4. Only I am adequately insecure when it comes to fractions and division of whole numbers. And then needless to say the concept of ane/4″ = 1 foot is almost incommunicable for me to grasp. But to make your own blueprint to scale yous simply have to use an architect's scale. That means for every 1/4″ you draw y'all are actually plotting out 1 human foot of firm. Correctly notated this is 1/4″:one′.
More than Than Merely Blue Paper
To make your own blueprint flooring plans, use a sheet of large newspaper. This is going to allow you your showtime blueprint. And all that fourth dimension I thought it was a blueprint because it was drawn on blue paper. How wrong I can be. For lack of technicality, I personally prefer a bill of fare stock that is well-nigh 24″ by 36″.
Architecturally speaking, the lower correct mitt corner of your drawing is reserved for the title block. Yous should write the name of the view you are drawing (floor plan, elevation, cross department), the calibration of the cartoon, the name of the business firm (could just be the family name), designer's name and date. We were a footling more crude though and just put in the upper centre the post-obit:
Tiny House – Draft ane – October 3, 2010
But like with digital files, the date is very important for when you make changes to your plans. You don't desire to slip up and lose track of what changes were made when and what programme you should be working with at the nowadays. This volition as well help come up build fourth dimension every bit anybody on site should be using the same plan with the same engagement.
1. Draw the exterior walls of your design. Nosotros first centered our rectangle (which represents the tiny house) on our paper and used our calibration to make sure our "trailer" was the correct size. For the floor program drawings you should depict the framed walls; interior and exterior. Finish elements such as sheetrock and paneling will come much subsequently and may not even crave blueprinting. They typically practise not. Call up, almost tiny houses are not much more than 190 sq. ft. and the builders are usually one in the same with the architect.
2.Draw the interior walls of your design.
For your interior walls:
- Draw both sides of each interior wall. If y'all will exist using 2″ x iv″ studs to frame your interior walls, the actual thickness of each framed wall will be 3-five/viii″ inches. Merely draw the wall first. Doors and walk throughs will be added afterward.
- Draw walls effectually whatsoever stairwell or ladder areas. This is particularly important if you are building a sleeping loft and will have some sort of permanent staircase type structure. If in that location will not exist a physical wall (or partition) around the stairwell simply draw a faint dotted line.
- Describe staircases (or ladders) within these walls.
- Draw an pointer labeled "upward" in the up management of the stair.
Annotation: Most tiny houses don't have many interior walls. Earlier you lot brainstorm to draw call up virtually the purpose of a wall, if you could practise without it, if there are any original means to offer privacy without closing in your already small infinite.
3.Add windows and doors to your design.
The next footstep as you make your own design is to draw your doors and windows onto the floor plan. For each door, window or wall opening on your floor plan:
- Apply your calibration to locate its position keeping in mind every one/4″ = i human foot of build.
- Draw the appropriate door or window symbol using the blueprint symbols on this page as your guide!
4. Assign Appliances, Plumbing and Fixtures.
Using your calibration, symbols, and directly border, draw the symbols for:
- All appliances (this includes those that are on wheels)
- Built in furniture such as kitchen and bathroom cabinets and counters
- Plumbing (sinks, toilets and tubs)
- Fireplaces/heating elements and Air conditioning/cooling devices
v. Draw Electrical Symbols.
This tin can sometimes be the almost difficult step as tiny houses often locate and relocate things such as electrical outlets and hard-wired lights. Even right now nosotros aren't certain where our plugs will go. Just for all intensive purposes, add all electrical to your plans.
Place the appropriate symbols along walls for the following electrical items:
- Plug outlets
- Wall switches for lights or switchable plugs
- Wall light such every bit sconces and LED strands
For ceiling mount items, draw fixtures lightly on the floor just below the spot where the detail would be installed.
6. Characterization Floor Surfaces and/or materials
Fifty-fifty if y'all aren't quite certain of the finish of your floor, you should still add some amount of particular to your plans past indicating how the floor space will be finished and any required sub-flooring. Ours reads:
- 1/4″ cork flooring over iii/4″ plywood decking
7. Add Measurements To Your Plans
The next step to brand your ain blueprint is to draw accurate measurements in the form of dimension lines. You will need to draw dimension lines for:
- Each room (although well-nigh tiny houses practice not have "rooms," per se)
- Closets
- Cabinet depths and/or bookshelf depths
- Distances from wall to back of toilet (know as the rough in dimension)
- Sizes of tub/shower unit of measurement
- Distances from walls to border of any appliances or fixtures.
8. Indicate Windows and Doors
For this step we turned to Microsoft Excel in order to make a table of our windows and doors. Information technology is a elementary layout with three columns. Cavalcade one contains the labels for our door or window. Column two is the door or window type (awning, double hung, single hung, sliding drinking glass, etc). And the third column is the bodily size of the door or window.
On the actual blueprint each door and window receives a number or letter which straight corresponds with the Excel dr..
ix. Dream!
Perhaps the all-time part of making your own blueprint though is dreaming. What will I put here? What kind of door do I want? Where will we put our pots and pans? What if we tried tile? The possibilities are endless. So long as you accept an eraser and a pencil y'all can change anything and everything as much every bit you like – BEFORE y'all outset to build!
winspearwhost1955.blogspot.com
Source: http://tinyrevolution.us/2011/08/10/how-to-draw-up-blueprints-for-your-tiny-house/